Practical guide

Street Light Glare: Identify the Source and Report It

Document a roadway glare issue safely, separate fixed lighting from vehicle headlamps, and ask the responsible authority to verify visibility under local guidance.

Editorial update

Decision in brief

Start by identifying whether the light comes from a fixed fixture, a moving vehicle, or a reflection. Record the task affected, such as seeing a person at a crossing, from a safe stationary position. Ask the road or fixture owner to verify the location and conditions. A remedy needs to retain acceptable visibility and lighting coverage while addressing the reported glare.

Record the glare: Identify the source. Note what is obscured. Contact the owner.
Observe from a safe stationary position. Ask the fixture or road owner to verify conditions and retain safe lighting coverage.

Record visibility, discomfort, and the source separately

FHWA distinguishes discomfort glare, the sensation of visual discomfort, from disability glare, a loss of the ability to see because contrast is reduced. Both can arise at the same location. Observe repeatable geometry, the immediate background, and reflection from wet pavement. Illumination for a crossing also depends on how well people or objects stand out from the approach.

A color temperature marking alone cannot diagnose glare. Fixture direction, mounting geometry, light intensity at the eye, adaptation, and the contrast of the target matter. A stationary photograph can document a site or fixture ID. Exposure and camera processing limit comparisons with how a person saw the scene. Ask the authority to check the jurisdiction's applicable guidance rather than treating a phone reading as a compliance measurement.

ObservationEvidence to log from a safe locationRoute the report to
Source stays fixed as traffic passesPole or fixture number, approach direction, and the affected part of a crossingThe city, road agency, or utility responsible for that fixture
Light travels with a vehicleTime and broad traffic conditions, without trying to identify or follow vehiclesRoad safety contact or vehicle-service channel if it is your own vehicle
Problem occurs mostly on wet pavementWeather, location of the apparent reflection, and whether the light source is fixedRoad owner for site review under the relevant conditions
Discomfort with adequate visibility, or objects disappear in the viewDiscomfort and difficulty identifying the feature as separate observationsRoad owner for a professional assessment of glare and visibility

Two HN cases show why the source and conditions matter

rurban described difficulty seeing some road users in rain when dim fixed roadway lighting and bright moving headlamps were present together. Use this as an observation to reproduce safely, with weather and source type logged separately. One account cannot show which light dominated at a different location.

In an independent Show HN, holg demonstrated a scene using luminaire photometric files and adjustable uplight. The example helps explain why asking for the fixture distribution and aiming data can make a complaint testable. A sky-glow simulation does not establish pedestrian visibility or local compliance.

Collect a report the road owner can act on

  1. Choose an affected feature such as a marked crossing or a pavement edge. Record the junction, direction, fixture ID if safely readable, approximate time, and the agency or owner that handles that location.
  2. Make a brief observation only from a safe stationary public location, outside any lane or rail area. Classify the source as fixed, moving, or uncertain. Avoid directing light at road users and stop if you cannot observe safely.
  3. If another safe visit is practical, use the same observation point and note weather, ambient light, and traffic differences. Report whether the target remained visible and how often the glare recurred. Send the notes and any location photo to the agency without collecting identifying road-user information.
  4. Ask the owner to verify the source and the applicable visibility and glare criteria before considering an intervention. Accept a proposed change only after the owner checks crossing visibility and coverage with the updated setup. Pause if the source stays uncertain or a proposed fix simply shifts glare to another approach.